Setting of system (System)
Setting of general (General)
After changing each parameter Apply is pressed and the content is reflected.
The contents of setting are displayed from the receiver again when press the Restore .
PC-ID/Next File Name
To Set of PC-ID of the receiver. “PC-ID” can set in ranges from “00” to “99”
The name of file which file is store of measuring data when start of next measurement display at
“Next File Name”.
Tag Prefix
The specified letter at this menu add to top of tag ID read by the receiver
It can set in ranges of from “A” to “Z”
Example: TAG ID
123456 Tag Prefix A A123456
Holding Time
To set time for ignore the same Tag ID.(From 0 – 60 second)
Even the same Tag ID comes during time appointed in this item, the receiver is not read it.
This function is not available when setting of time is “0”
Measure at
To set of timing of measurement
Both “Beginning Time
Ｔｉｍｅ
” and “Mid Time” are available.
Beginning Time
The time data measure when this was in the trigger area.
Mid Time
The time data measure by calculation to middle point from
two kind of data. i.e. J-chip tag is in the trigger area and it is out from this area.
13