mipan PN
Numeric Panel-Mount LED Display with Profinet IO RT Interface
Page 6
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0,
+49 9681 91960-10, [email protected], www.microsyst.de
5 Profinet
5.1 System and Device Start-Up
A display test is performed after start-up.
After this, the connection between the Profinet controller and the Profinet de-
vice is established automatically (this can last up to approximately 10 seconds).
To let this happen, the PN controller must be correctly configured and the PN
device must have the matching name.
As long as no connection is established, the display shows “------ “ and it’s
red LED is on.
After successful connection, the display is deleted and the red LED goes out.
The display is ready for data reception now.