mipan PN
Numeric Panel-Mount LED Display with Profinet IO RT Interface
Page 10
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
+49 9681 91960-0,
+49 9681 91960-10, [email protected], www.microsyst.de
5.3 Profinet Device: Assign Name
The Profinet device must be assigned (one time) the device name, which also
was chosen in the Profinet controller configuration ("
miface1
" in the example
above).
For this, connect the device to the Profinet network and establish its power
supply.
Start the tool for setting the device name:
o
Mark (click) the concerned device in the bus overview
o
Select the menu item „PLC/Ethernet/Assign Device Name...“
o
Mark (click) the line with the corresponding device (see MAC-address)
o
Click „Assign name“
o
Close window
Tip:
If you want to find the device of the marked line, you can click on „Flash-
ing on“. The LED 1 (green) of the corresponding device starts to blink then.