2.
The WSDA
®
will now be found and reported in the Controller frame as Base Station
Com X. Figure 5 shows an example Com 2.
3.
Node Commander
®
can now be used to configure the wireless nodes for operation,
perform calibration using the wizards, set the sampling mode to one of the Aggregate
Data modes previously mentioned, and so forth. For those users familiar with
MicroStrain’s previous base stations, the WSDA
®
is now operating as if it was a base
station.
•
Note: Please refer to our Node Commander
®
Users Guide for a full step-by-step
explanation of its use.
Set the WSDA
®
to Aggregate Data mode
1.
After having configured the nodes for sampling, close Node Commander
®
.
2.
Return to Live Connect.
3.
Highlight your WSDA
®
, click Disconnect, and in a moment, the WSDA
®
will be
disconnected.
4.
Again highlight your WSDA
®
, click View, login, and the WSDA
®
Control Panel will
appear.
5.
Click Configuration in the Tools menu.
6.
The Configuration window will appear.
7.
Click the Aggregate Data radio button in the WSDA
®
Mode section.
8.
Click the Update WSDA
®
Mode button, the window will refresh and the mode will be
changed.
9.
Click Logout and close your WSDA
®
Control Panel browser window.
10.
Return to Live Connect and click Exit to close the program.
5
Figure 5. Node Commander
