Quick Start Guide
3DM-DH3
™
Downhole Orientation Sensor and Data Logger
Version
•
3DM-DH3
™
firmware 10
•
3DM-DH3
™
software 1.0.2
Starter Kit
The 3DM-DH3
™
starter kit contains:
•
3DM-DH3
™
orientation sensor/datalogger
•
RS-422 communication and power ribbon cable (3 meters)
•
EasySYNC
™
RS-422/RS-232 adapter
•
EasySYNC
™
driver CD
•
USB cable (2 meters)
•
9 VDC power supply (100-240VAC, 4 universal adapters)
•
3DM-DH3
™
utility software CD (Windows
®
XP, Vista, 7)
Software Installation
•
Insert the 3DM-DH3
™
utility software CD into your CD-ROM drive and follow the on-
screen instructions to install the software.
•
Insert the EasySYNC
™
driver CD into your CD-ROM drive and follow the on-screen
instructions to install the driver.
Hardware Installation
•
Insert the 16-pin black connector on the RS-422 ribbon cable into the end connector on
the 3DM-DH3
™
observing the keyway.
•
Connect the 9-pin DB9 connector of the ribbon cable into the EasySYNC
™
Serial
connector.
•
Set the EasySYNC
™
dip switches 1, 2, 3 and 4 to the ON position to enable RS-422
operation.
•
Connect the power supply to the power pigtail on the RS-422 ribbon cable and into a
power receptacle.
•
Connect the USB cable to the EasySYNC
™
USB connector and into your host PC.
•
Depress the 2-position red switch on the ribbon cable to its IN position.
Software Operations
•
Launch the 3DM-DH3
™
utility software and the Main screen will appear.
•
Click File and a drop-down menu will appear.
•
Click Connect and the Connect window will appear.
1