Microsonic TEL2911, Руководство пользователя

Страница: 9 / 11

9
INSTALLATION
1. Plug one end of the line cord into the connector marked “LINE” on the base of the telephone and the
other end into the wall socket.
2. Connect the handset to the base of the telephone with the curly cord.
3. Select your preferred ringer volume (High or Low).
4. Set the dial mode to PULSE or TONE dialing according to your local network.
RECEIVING A CALL
¾ From handset
1. When the telephone rings, pick up the handset and talk to the other party.
2. When finished, return the handset to the base.
¾ Switching to speakerphone
1. When using the handset, press H.F key and return the handset to the base.
2. When finished, press H.F key again.
¾ From speakerphone
1. When the telephone rings, press H.F key and talk to the caller. For the other party to hear your voice
clearly, speak into the speaker from a distance of 32cm or less.
2. When finished, press H.F key again.
MAKING A CALL
¾ From Handset
1. Pick up the handset.
2. When you hear the dial tone, dial the desired number.
3. When finished, return the handset to the base.
¾ From Speakerphone
1. Press H.F key
2. When you hear the dial tone, dial the desired number.
3. When finished, press H.F key again.
¾ Redial
1. Pick up the handset or press H.F key,
2. Press REDIAL/P key, the last dialed number will be dialed again.
TWO-TOUCH MEMORY OPERATION
¾ Store the number in two-touch memory
1. Pick up the handset or press H.F key, then press STORE key.
2. Enter the phone number you want to store using the dial pad.
3. Press STORE key.
4. Press one of digit keys (0-9) to store the number under that chosen digit.
¾ Make a call from two-touch memory
Pick up the handset or press H.F key, press RECALL key and then press one of digit key (0-9) to dial the
stored number out.
FLASH FUNCTION
When you dial a number to make a call, and you receive busy tone, you could press the FLASH key and