Microsoft Surface Hub 55 inch Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 14

Microsoft Surface Hub 55 inch Скачать руководство пользователя страница 1

©2015 Microsoft. Microsoft, the Microsoft logo, and the Microsoft Surface Hub logo are trademarks of the Microsoft
group of companies. Microsoft Corporation One Microsoft Way Redmond, WA 98052-6399 USA

Microsoft Surface Hub

Rolling Stand Assembly and Mounting
Guide (55”/84”)

Important safety warnings

Before assembling and mounting Microsoft Surface Hub on the rolling stand, read these
important safety warnings.

This symbol identifies safety and health messages in this device guide

WARNING: Read safety and health information

Read this guide for important safety and health information. Keep all printed guides for
future reference. Failure to follow instructions and properly set up, use, and care for this
product can increase the risk of serious injury or death, or damage to the device or
devices. For an online version of this guide and additional support, safety and health
information go to:

www.surface.com/support/surface-hub

WARNING: Installation experts—knowledge

Improper handling or installation could result in injury or death. To avoid hazards related
to improper installation, ensure the installation is performed by people who have read
and understand the installation instructions prior to beginning.

WARNING: Minimum number of installers

1
2
3
...
»

Содержание Surface Hub 55 inch















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды