Microsoft Perceptive Pixel, Руководство пользователя

Страница: 14 / 28

©2013 Microsoft Corporation
14
Connecting the device and peripherals to the computer
You will need the following parts for this procedure:

Computer meeting system requirements

PPI 55″ Touch Device with USB and DVI cables connected
Connect the cables to the computer as follows:
1. Connect the free end of the DVI cable into the dual-link DVI connection and tighten the thumbscrews.
2. Connect the free end of the USB cable from the device into any of the USB ports on the computer.
Powering on the system
Use the following procedures to apply power to the system.
1. If not already on, turn on your surge protector.
2. Turn the power switch next to the power connector (rear underside) to the 1 position. An amber light
just above the keypad power button should illuminate.
Figure 9. Power switch indicated