5
Prerequisites
The enclosure is designed for installation into a standard 19-inch rack cabinet with:
• Minimum depth of 27.84 inches from rack post to post.
• Maximum weight of 32 kg for the device.
• Maximum back pressure of 5 Pascal (0.5 mm water gauge).
Rack-mounting rail kit
A set of mounting rails will be provided to use with the 19-inch rack cabinet. The rails have been
tested to handle the maximum enclosure weight. These rails will also allow installation of multiple
enclosures without the loss of space within the rack.
Install the device on the rails
Follow these steps to safely install the device on the rails.
1. With the enclosure on the work surface, remove the left and right front flange caps by pulling
the caps free. The flange caps simply snap onto the flanges.
2. These rails are installed at the factory. If these are not, then install the left-rail and right-rail
slides to the sides of the enclosure chassis. They attach using six metric screws on each side. To
help with orientation, the rail slides are marked “LH - Front” and “RH – Front,” and the end that
is affixed towards the rear of the enclosure has a tapered end.
1
2
Figure 2 Attaching rail slides to the sides of the enclosure
