Microsensor MPM489W, Руководство по эксплуатации

Страница: 10 / 20

8
In the flowing water, the acted surface should be parallel with the water
flowing direction.
6.2.1 Installation in the Static Water
The installation method in the static water see Fig. 6.
To prevent shaking or destroying the transmitter when pumping, the
transmitter should be put away from the liquid resource. Otherwise it
should be installed as Fig. 7, protected by steel tube.
The installation method in the deep well see Fig. 7.
Steel tube inserted method is usually used. The steel tube cannot be
bent; the diameter of steel tube must be more than 30mm. Several holes
should be made at different heights on the tube so as to easily raising
and make water flow smoothly. If necessary, wrap steel wire around
transmitter to prevent breaking the cable by lifting with the steel wire.
s ed i me n t
El ec t ni ca l C on n ec t io n B ox
C o n t r o l R o o m
F ix ed Mo un t
Fig. 6