Microsensor MFE600C, Руководство по эксплуатации

Страница: 3 / 23

1
Thank you very much for choosing our products. In order to better use the product, it is recommended
that you read the instructions carefully before using the product.
1 Introduction
MFE600C Insert electromagnetic flowmeter (hereinafter referred to as plug-in flowmeter is designed and
manufactured with the most advanced domestic and abroad technology. It has the characteristics of high
reliability, good stability, and long service life.
The plug-in electromagnetic flowmeter is a new type of flow measurement instrument developed on the
basis of the pipeline electromagnetic flowmeter. On the basis of retaining the advantages of the pipeline
electromagnetic flowmeter, it avoids the disadvantages of difficult and expensive installation of the
pipeline electromagnetic flowmeter on a large pipeline. In particular, the method of tapping under
pressure and installation under pressure can be adopted, so that the plug-in flowmeter can be
constructed and installed without stopping the water. It provides a new method for liquid flow
measurement and installation. It has been widely used in chemical, water supply and drainage, sewage
treatment and other industries.
2 Specifications
Table1
Diameter DN150~DN1600
Measurement accuracy ±2.5%
Electrode type Standard fixed electrode
Pressure port ANSI 1/2 NPT, JIS G1/2
Structure type Integrated type, separated type (cable length of s
eparated type≤100m)
Rated pressure 0.6Mpa, 1.0Mpa, 1.6Mpa
Electrode material 316L, Ti
Ball valve material Stainless steel
Probe ABS
Flange/body flange Stainless steel
Converter housing Aluminum die-casting
Power supply
100 V AC~240V AC
12V DC,24V DC
Battery supply (LCD display, RS485 output, wireless output, frequency/pulse output, and the
frequency/pulse output is used only for calibration purposes.)
Output signal
4mA~20mA DC (load resistance 0
Ω~750Ω, active output)
Hart
Frequency, pulse output (Passive, active output optional)
Upper and lower limit alarm output
RS485(Modbus protocol), RS232
Profibus-DP, Profibus-PA
4G wireless transmission
Electrical connection ISO M20×1.5