5
Compare the contents of your Power over Ethernet Injector package with
the standard checklist above. IF any item is missing or damaged, please
contact your local dealer for service.
Installation
To install the Power over Ethernet Injector, please follow the steps below.
1. Use RJ-45 cable to connect the
Data in
port of the Power over
Ethernet Injector to Switch/HUB.
2. Use RJ-45 cable to connect the
Data out
port of the Power over
Ethernet Injector to PoE Splitter, PD (Such as Router, Access
Point
…etc.) or PoE Hub.
3. Plug in the power cord of the Power over Ethernet Injector to the wall
power plug.
4. Before starting, make sure all connections are correct.
The Power over Ethernet Injector connects to the Splitter, POE
Hub or PD via
Data Out
port.
The Power over Ethernet Injector connects to the switch/hub via
Data In
port
.
The
Power In
port is to get the power supply for Power over
Ethernet Injector from wall power plug.
