Microsemi VSC8584 Скачать руководство пользователя страница 4

VSC8584 Evaluation Board

VPPD-03500 VSC8584 User Guide Revision 1.0

2

2

Introduction

The VSC8584 device is a low-power, quad-port Gigabit Ethernet transceiver with four SerDes interfaces 
for quad-port dual media capability. It also includes an integrated quad port I2C multiplexer (MUX) to 
control SFPs or PoE modules. The VSC8584 supports IEEE 802.1AE 128/256-bit MACsec protocols to 
meet the security requirements for protecting data traversing Ethernet LANs, and also includes Vitesse’s 
patent-pending distributed timing technology VeriTime™ that delivers the industry’s most accurate IEEE 
1588v2 timing implementation. The VSC8584 device offers a seamless integration between IEEE 1588v2 
and the MACsec engine with no loss of precision. The VSC8584 also supports a ring resiliency feature 
that allows a 1000BASE-T connected PHY port to switch between master and slave timing without 
having to interrupt the 1000BASE-T link.

This document describes the architecture and usage of the VSC8584 Evaluation Board (VSC8584EV). The 
VSC8584EV may be used to evaluate a family of devices which include VSC8584. These devices vary with 
respect to the number of ports, supported interfaces, and available features. This document specifically 
addresses the VSC8584 device. 

 section describes how to bring-up the evaluation board 

The Quick Start

along with install and run the graphical user interface (GUI), used to control the evaluation board.

Figure 1 • VSC8584EV Evaluation Board

The following reference documents provide additional information about the operation of the VSC8584 
evaluation board.

VSC8564 Datasheet (

)

https://www.vitesse.com/products/product.php?number=VSC8564

VSC8582 Datasheet (

)

https://www.vitesse.com/products/product.php?number=VSC8582

VSC8575 Datasheet (

)

https://www.vitesse.com/products/product.php?number=VSC8575

VSC8584 Datasheet (

)

https://www.vitesse.com/products/product.php?number=VSC8584

IEEE1588v2 and SyncE – Applications and Operation Using Vitesse’s Synchronization Solution
(

)

http://www.vitesse.com/products/download.php?fid=4767&number=VSC8574

VSC8584 GUI (

)

https://www.vitesse.com/products/product.php?number=VSC8584

Содержание VSC8584
















Отзывы: