PD-IM-7401 Evaluation Board - User Guide
Copyright © 2009
Microsemi
Page
5
Rev. 1.0, 8-Apr-10
Analog Mixed Signal Group
2381 Morse Avenue, Irvine, CA 92614, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
2 Introduction
Microsemi’s PD-IM-7401 Evaluation Board (see Figure 1) provides the designer with the needed environment to
evaluate the performance and the implementation of PoE applications based on the PD69101 PoE Manager. The
evaluation board enables PoE designers to evaluate Microsemi's PoE solution with maximum flexibility and ease in
configuration
All the necessary steps and connection instructions required to install and operate this board are provided within
this document.
Figure 1: PD-IM-7401 Evaluation Board - General View
Figure 2: PD-IM-7401 Configuration Board -
General View
2.1
Evaluation Boards Ordering Information
Microsemi’s supplies the following Evaluation Boards as shown below:
Ordering Number
Description
PD-IM-7401
1 port1 Evaluation Board that simulates a one port switch.
2.2
Evaluation Board Features
Design to support one port PoE application (2-pairs or 4-pairs)
Two RJ45 connectors (data in, data and power out)
Vin connectors – DC in connector
On board LEDs indicators
Reset
button
Pulse transformers and common mode chocks
Easy configuration of switch's board
Evaluation Board working temperature: 0° to +50° C
RoHS
compliant
