background image

1

dc1732f

DEMO MANUAL DC1732

DESCRIPTION

LTM9012 

14-Bit, 125Msps Quad ADC

with Integrated Drivers 

Demonstration circuit DC1732 supports the LTM

®

9012 

high speed, quad ADC modules. 
The versions of the 1732B demo board are listed in Table 1.  

Depending on the required resolution and sample rate, the 

DC1732 is supplied with the appropriate ADC. The circuitry 

on the analog inputs is optimized for full bandwidth. Refer 

L

, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear 

Technology Corporation. All other trademarks are the property of their respective owners.

to the data sheet for proper input networks for different 

input frequencies.  
Design files for this circuit board are available at  

http://www.linear.com/demo

(T

A

 = 25°C)

Table 1. DC1732 Variants

DC1732 VARIANTS

ADC PART NUMBER

RESOLUTION

MAXIMUM SAMPLE RATE

INPUT RANGE*

1732B-AB

LTM9012-AB

14-BIT

125 Msps

220mV

P-P

*With SENSE pin tied to 1.8V.

PERFORMANCE SUMMARY

PARAMETER

CONDITION

VALUE

Supply Voltages – DC1732B

Depending on Sampling Rate, This Supply Must Provide Up to 700mA.

3V to 6V, 5V to 6V

Analog Input Range

Depending on SENSE Pin Voltage

110mV

P-P

 to 220mV

P-P

Logic Input Voltages

Minimum Logic High

1.3V

Maximum Logic Low

0.6V

Logic Output Voltages (Differential)

Nominal Logic Levels (100Ω Load, 3.5mA Mode)

350mV/1.25V Common Mode 

Minimum Logic Levels (100Ω Load, 3.5mA Mode)

247mV/1.25V Common Mode

Sampling Frequency (Convert Clock 

Frequency)

See Table 1

Encode Clock Level

Single-Ended Encode Mode (ENC

 Tied to GND)

0V to 3.6V

Encode Clock Level

Differential Encode Mode (ENC

 not Tied to GND)

0.2V to 3.6V

Resolution

See Table 1

Input Frequency Range

See Table 1

SFDR

See Applicable Data Sheet

SNR

See Applicable Data Sheet

This datasheet has been downloaded from

http://www.digchip.com

at this

page

Содержание DC1732 Series











Отзывы: