Microscan MS-710 Скачать руководство пользователя страница 76

Страница: 76 / 186

1D Symbologies

5-6

MS-710 Scanner User’s Manual

5–Symbologi

Symbol Length (Code 128)

Note: Fixed Symbol Length Status must be enabled for Symbol Length to take effect.
If

Enabled, the scanner can read symbols with or without a function 1 character in the

first position.
Note: The reply from a <Kt?> request

may appear to have an extra field, e.g.:
However, the third comma in from the

right is actually the application record separator character in the default setting.
When set to

Standard, EAN-128 application identifiers and data fields are sent, but

none of the formatting (separators, parentheses, padding) will be included.

Application Record

A variation of EAN-128 that allows the user to define separators between data fields,

enclose application identifiers in parentheses, and enable padding (zeros) for variable

length fields.

Usage:

Fixed Symbol Length helps prevent truncations and increases data

integrity by ensuring that only one symbol length will be accepted.

Definition:

Specifies the exact number of characters that the scanner will recognize

(this does not include start and stop and check digit characters). The

scanner ignores any symbol not having the specified length.

Serial Cmd:

status,fixed symbol length status,

fixed symbol length

,EAN-128 sta-

tus,output format,application record separator status,application record separa-

tor character,application record brackets,application record padding>

Default:

Options:

1 to 64

Содержание MS-710



























































































































































































Результаты поиска

Содержание MS-710

Отзывы:

Microscan MS-710, Руководство пользователя, Страница: 76 / 186

Результаты поиска

Содержание MS-710

Отзывы: