Microscan HawkEye 1600T, Руководство пользователя

Страница: 44 / 79

Appendix A Connector Pinouts
A-4 HawkEye™ 1600T Smart Camera Guide Rev. 1G, Dec 2008
Table A–4 describes the Serial and Secondary I/O connector signals.
Notes:
1.
Bipolar isolated current input 5-24V, 1-5ma., 60 VAC isolation:
– Logic 0: 0 to 5V with respect to GPIO In Com
– Logic 1: 15 to 30V with respect to GPIO In Com
– Rin: 18k Ohms with respect to GPIO In Com
2.
Bipolar isolated output switch, Ron = 35 ohm max., Ion < 20ma.,
Voff < µ±30VDC, 60VAC isolation (short circuit protected: 160-240 ma pk.)
with respect to GPIO Out Com.
3.
Serial communication Transmit signal (RS-232)
4.
Serial communication Receive signal (RS-232)
5.
Common wire for General Purpose I/O opto-isolated outputs.
6.
Common wire for General Purpose I/O opto-isolated inputs.
Ethernet Connector
Figure A–3 shows the pinout of the Ethernet connector.
TABLE A–4.
Serial & Secondary I/O Connector Signals
Pin Signal Name Direction H/W Description Notes
1 GPIO 3 In/Out S/W Programmable General Purpose I/O 1,2
2 GPIO 4 In/Out S/W Programmable General Purpose I/O 1,2
3 Td Out RS-232 Transmit 3
4 Rd In RS-232 Receive 4
5 GPIO 1 In/Out S/W Programmable General Purpose I/O 1,2
6 GPIO 2 In/Out S/W Programmable General Purpose I/O 1,2
7 GPIO Out Com GPIO Output Common 5
8 GPIO In Com GPIO Input Common 6
Shell Chassis Ground RS-232 Common