DN120 DeviceNet Gateway User’s Manual
Microscan Systems, Inc.
51
Data Size
– Read-only value, set to 8 if no parity selected and 7 if party selected.
Stop Bit
– Read-only value, always set to 1.
Flow Control
– Click on arrow to the right of the
current value
to select from pull-down menu.
Receive Count
– Read-only value.
Transmit Count
– Read-only value.
Maximum Receive Size
– Click on
current value
and enter desired number in decimal.
Maximum Transmit
– Click on
current value
and enter desired number in decimal.
Data Format
– Click on … to open selection box. Click on check box to select the desired
option. The Delimiter Mode uses bits 0, 1, 2, 3 of the byte. Ignore bits 4 through 7.
Block Mode
– Click on … to open up selection box. Click on check box to set or clear the
desired bit. The Serial Status byte uses bits 0 through 6. Ignore bit 7.
Receive Delimiter
– Click on
current value
and enter number in decimal.
Pad Char
– Click on
current value
and enter number in decimal.
