Microscan DN120 DeviceNet Скачать руководство пользователя страница 18

Страница: 18 / 71

DN120 DeviceNet Gateway User’s Manual

Microscan Systems, Inc.

Chapter 4 – Gateway Configuration

This chapter describes how to configure and operate the DN120 gateway. You configure the

gateway by reading and writing attribute values over its DeviceNet interface. There are a variety

of DeviceNet configuration tools available. Simple configuration tools use GET_ATTRIBUTE

and SET_ATTRIBUTE explicit message commands to read and write attribute values,

addressing each attribute by its Object, Instance, and Attribute numbers. This information is

contained in Chapter 5. More sophisticated configuration tools use EDS files to simplify

attribute configuration. You can configure the gateway using pull-down menus, buttons, and

data entry fields from the gateway’s Electronic Data sheet (EDS) file. Chapter 6 contains a

configuration example using the Rockwell Software RSNetworx



program.

Configure DeviceNet Interface

Set the DeviceNet Baud Rate and MAC ID Address using the rotary switches. Configure

switches before connecting to the DeviceNet network. There is either a small triangular

indicator or white indicator on the switch. Use a small screwdriver to align that indicator with

the desired setting. Remove the DN120 cover if necessary to access the rotary switches.

DeviceNet Baud Rate Switch
Valid settings are 125K, 250K, 500K, or PGM. When PGM is selected, the DN120 uses the

baud rate saved in its retentive memory. A valid baud rate must be stored before the PGM

selection can be used. The baud rate is stored from the previous DN120 power cycle. It can also

be set over the network (DeviceNet Object Baud Rate attribute).

POSITION SETTING POSITION SETTING

125 Kbps

invalid

250 Kbps

invalid

500 Kbps

invalid

PGM

MAC ID Switches
The two MAC ID switches represent decimal numbers from 00 to 99. The LSB switch selects

the

Ones

digit and the MSB switch selects the

Tens

digit. Valid MAC IDs are 00 to 63. Setting

a MAC ID address greater than 63 forces the gateway to use the MAC ID saved in retentive

memory. A valid MAC ID must first be stored before this feature can be used. The MAC ID is

stored from the previous DN120 power cycle. It can also be set over the network (DeviceNet

Object MAC ID attribute).

MSB LSB Address MSB LSB Address

0 to 9

00 to 09

4 to 9

stored address

0 to 9

10 to 19

0 to 3

stored address

0 to 9

20 to 29

0 to 9

stored address

0 to 9

30 to 39

0 to 9

stored address

0 to 9

40 to 49

0 to 9

50 to 59

0 to 3

60 to 63

Содержание DN120 DeviceNet








































































Результаты поиска

Содержание DN120 DeviceNet

Отзывы:

Бренды по названию

Популярные бренды

Microscan DN120 DeviceNet, Руководство пользователя

Результаты поиска

Содержание DN120 DeviceNet

Отзывы:

Бренды по названию

Популярные бренды