MicroPower SLV-C306-1011-IR, Руководство по установке, Страница: 27 / 40

27
Camera Mounting
During the assembly process, you’ve already attached the rotating portion of the camera bracket to the camera
housing. This leaves the lightweight camera arm bracket to be easily attached to the desired mounting surface.
1. Use the appropriate hardware to mount the bracket to your desired surface. This may require stainless
steel hose clamps (easiest and quickest, particularly for large poles), screws (good for flat wood surfaces), or
perhaps stainless steel “U” bolts (good for narrow gauge masts).
2. Once the camera arm bracket has been secured to your desired mounting surface, then place the
rotating portion of the mount, onto the camera arm bracket. If you arranged the movable bracket
such that the camera was balanced, it should be very easy to hold the camera in place on the arm bracket,
while you attach the single screw to secure the entire assembly together.
3. Now you can adjust the position of the camera, and connect the solar power cable and the antenna cable.
4. Once you have the antenna cable and solar power cable attached, you may then power on the camera by
connecting the battery plug inside the camera. IR enabled cameras will have (2) battery plugs that must be
connected (or disconnected to power off the camera) (see next page)
5. Be sure to tightly secure the arm bracket screw, thus locking the camera in place. It is easy to forget to secure
it tightly, leaving the camera vulnurable to unintended movement or potentially falling during high winds.
The solar panel should be positioned above the camera, or,
arranged such that so no shadows are created on the panel
surface. (Even small shadows will dramatically decrease
the solar panel effeciency)