62 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
7.13. Data Interface Configuration
This function is used to set the interface parameters.
LINE
ENTER
»
ENTER
ENTER
ENTER
»
ENTER
FEED
EN TE R
LINE
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1
]
$
$
$
[Configuration
]
[Interface
]
[SIA Timeout ]
[ 30 s
]
$
$
$
[ 40 s
]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
The ENTER key gives the user access to
the menu structure.
Press the NEXT or PREVIOUS key until
[Configuration ] is displayed.
The currently set value for he timeout is
displayed (here: 30 seconds).
Pressing the NEXT or PREVIOUS key
changes the value.
The timeout (the waiting period for SIA to
switch to the next interface) is increased
to 40 seconds.
In addition this new value can be saved as
setup value (using the ENTER key).
After this decision turn the printer ON
LINE again: Press the LINE key.
Note:
The printer uses SIA (Simultaneous Interface Administration) to check,
which interface is currently used for the transfer of print data.
