44 Operation and Menu Structure
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
Functions / Changing of function values:
»
«
ENTER
FEED
Within one function the value can be changed by pressing the key
NEXT or PREVIOUS.
In case of a multi-digit function value the value of the currently chosen
digit will be changed.
In case of a multi-digit function value pressing the ENTER key
switches to the next position (digit) of the function value.
Pressing the FEED key switches to the previous digit of the function
value.
Please note: If you press the FEED key although the absolute left
digit of the function value is still arrived, the changing
procedure will be cancelled and this moves you to the
next menu level above.
If you press the ENTER key although the absolute right
digit of the function value is still arrived, the currently
displayed function value is stored.
ENTER
[Save as Setup?]
ENTER
FEED
By pressing the ENTER key the function values currently displayed
are confirmed respectively the selected function is activated (the
changes are saved until the next printer power off; this kind of
saving is called temporary).
After this you have to decide, if you want to save the changes
permanent (Save as setup).
To select such changes permanently, the user must press the
ENTER key one more time. These permanent changes in printer
configuration are active each time the printer is turned on again.
If the FEED key is pressed instead, the changes are only stored
temporary (not saved as setup).
(This key takes the user to the respective previous menu level).
