(MicronWings Deluxe Version)
Specifications
Wingspan: 40.5cm
Flying Weight: 28 grams
(with battery)
Channels: 3
Suggested Receiver: 4Ch Micro
Motor: 7mm Brushed Direct Drive
Airframe Kit
(Included Contents)
* Airframe Parts Sheets (Depron)
* Airframe Bracing Parts (Plywood)
* Motor and Propeller
* Control Li Pushrods
* Sandpaper Sheet
* Decal Stickers
* Undercarriage
Needed to Complete
* Micro Receiver with 2A ESC
* Two Micro Servos (5320 Servos)
* Transmitter and Battery Charger
* Battery (130 to 160mah 1S)
* Soldering Iron with Fine Tip
* Epoxy Glue
* UHU Por Expanded Polystyrene Glue
* Micro Screwdriver
* Micro Drill Set (less than 1mm diam)
* Hobby Knife
* Blenderm Hinge Tape
* Modelling Tape - Optional
* Ruler (metal preferred)
* Plyer snips or side cutters
* Fine tip scissors
* Tweezers
MicronWings sells this deluxe version of the J3 Cub under
license from the manufacturer, Minimum RC. The
MicronWings Deluxe Version features an airframe cut from
3mm Depron as well as improved design features and the
addition of control surface bracing mounts.
The J3 Cub is small enough to be flown indoors (sports
stadium area) and is also capable of being flown outside on
a calm day. With a direct drive 7mm x 20mm brushed
motor, this model can cruise adequately at just half throttle
and at full throttle it can even perform loops.
