PPS-
28
Linear/Stepper Motor Positioner Stage
9
Rev: 3.2
MICRONIX USA,LLC
www.micronixusa.com
Reference Manual
4.
Installing the PPS-28
Mounting patterns require M3 or M2.5 screws for mounting and M1.5 x 5mm
dowel pins for precision alignment. Additional brackets and screws may be
needed for custom applications.
4.1
PPS-28 Installation
4.1.1
General Mounting
For general mounting configurations, mount the base to the mounting surface.
Move the carriage to access base mounting pattern. (Please note, it is possible
to move the carriage of the linear motor configurations manually without
damaging the stage, however, for *stepper versions the motor must be driven by
a controller to reposition the carriage.)
Stepper Motor
Linear Motor
Travel
L
A
Travel
L
A
26mm
45
40 26mm
60
50
51mm
90
50 51mm
90
50
76mm
120 80 102mm 150 80
102mm 150 80
Requires:
2x M1.5 x 5mm Dowel Pins
2x M3 x 5mm Socket Head Cap Screws
1. Move carriage via controller*, if
necessary, to access mounting
hole. Insert Pins and M3 SHCS as
shown.
2. Move carriage via controller*, if
necessary, to access remaining
mounting hole. Install M3 SHCS as
shown.
Customer Supplied
Base Plate or
Mounting Surface
Clearance
Hole
Direction
of Travel
Top View
Stage Mounting Pattern
