4-10
Micronics M54Hi-Plus System Board Manual
Diskette Controller
The floppy disk controller may be enabled or disabled.
Integrated PCI IDE
The PCI IDE controller may be set for Primary (up to two hard disks), Both
(up to four hard disks), or it may be disabled.
UART 2 Mode
UART 2 Mode is used to configure the on-board infrared controller. It may
be set for Standard (default), IrDA, or ASKIR.
Plug and Play O/S
This category, when set to Yes, allows the system to work with a Plug and
Play operating system such as Windows 95. The default setting is No.
Reset Configuration Data
Select Yes to clear the system configuration data. The default setting is No.
Large Disk Access Mode
If you are using a DOS operating system (MS-DOS, DR-DOS, or PC-DOS),
set to DOS (default). If you are using anything else, set to OTHER.
