manualshive.com logo in svg

Micronics 60/66MHz, Руководство пользователя

Поделиться
Скачать
Micronics 60/66MHz Скачать руководство пользователя страница 32

4-7

The BIOS Setup Utility

System BIOS

The System BIOS Option allows you to Shadow, Shadow & Cache, or Disable
the BIOS Shadow on the system board.  Choosing SHADOWED copies the
system’s BIOS into RAM for faster execution.  Choosing SHADOWED &
CACHED caches the shadowed system BIOS for even higher performance.
This allows you to take advantage of the high-speed 32-bit bus and the 70
nanosecond RAM.  Use the <+/-> key to toggle between the options.

Video BIOS

The Video BIOS Option allows you to Shadow, Shadow & Cache, or Disable
the BIOS Shadow on the system board.  Choosing SHADOWED copies the
system’s video BIOS into RAM for faster execution.  Choosing SHADOWED
& CACHED caches the shadowed video BIOS for even higher performance.
Use the <+/-> key to toggle between the options.  The System BIOS Shadow
option must be set to SHADOW or SHADOW & CACHE before enabling the
Video BIOS Shadow options.

Option ROM

Some peripheral cards such as low-priced SCSI controllers and network
adapters which do not have their own BIOS require this feature.  Check the
documentation of your peripheral cards to see if they need this feature.

Содержание 60/66MHz

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды