Racing Functions
9
Steer the boat towards the eye of the wind until the Heading in the upper
pane matches the Line Perpendicular in the lower pane.
If the wind is coming from the starboard side, the line is starboard
biased. If the wind is coming from the port side, the line is port biased.
To set the Start Timer
Go to the Race Timer (TMR) page.
Press
for 1 second, the last start countdown value is shown, flashing.
If required adjust the countdown value using
and
.
Press
to exit edit mode and prepare for countdown.
At the first "gun" press
to start the countdown.
The timer will sound a single beep at the end of each minute.
During the last minute, the timer will sound a beep every ten seconds.
During the final ten seconds, the timer will beep every second.
"START" will be indicated by a triple beep.
At the end of the countdown, a pre-selected data page is displayed,
(see page 25 to select the page).
The timer will count the elapsed time in the background, until stopped by
scrolling to the Race Timer (TMR) page and pressing
for two seconds.
To adjust the Timer
At any time during the countdown, press
to resynchronise the
countdown to the nearest minute.
Содержание T075-916
Страница 1: ...Race Master System User Guide...
Страница 17: ...Micronet Functions 15 Chapter and Page Diagram...
