MicroNet SP916GL, Руководство пользователя

Страница: 21 / 46

21
Beacon Interval : Type the beacon interval in the text box. You can specify a value from
1 to 1000. The default beacon interval is 100.
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value
stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until
data flow is normalized.
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet
transfer error rates are high, choose values between 256 and 2432 until packet transfer
rates are minimized. (NOTE: set this fragmentation threshold value may diminish system
performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text
box. You can specify a value between 1 and 65535. The default value is 3.
TX Rates (MBps): Select one of the wireless communications transfer rates, measured in
megabytes per second, based upon the speed of wireless adapters connected to the
WLAN.
11g only mode: enable or disable.
Antenna Transmit Power: Adjust the power of the antenna transmission by selecting
from the dropping list.
Super G mode: Super G mode is disabled by selecting “Disable” from the drop list. If
you like to use Super G to enhance the speed, there are three options on Super G mode:
Super G without turbo; Super G with Dynamic turbo and Super G with Static
turbo. Turbo mode indicates the combination of two channels to enhance the throughput.
Super G without turbo indicates that it is on Super G mode without the channel’s
combination. Dynamic turbo is able to automatically detect if any ‘SuperG based’
product is available. If no, the connection is via ‘normal’ G.. Static turbo means it will
not go back to ‘normal’ G once it starts.