47
Figure: IPSec Policy Setup
Settings – IPSec Policy Setup
Policy Entry
•
Tunnel Name
– Given a name for this tunnel.
•
State
– Enable/Disable VPN policy state.
Traffic Binding
•
Interface
– Select WAN1 for binding VPN tunnel.
Local Identity
Option
•
Type
– There are three local WAN identity types to choose
from: IP address, domain name and distinguished name.
Traffic Selector
•
Protocol Type
–
You can choose either
TCP/UDP/ICMP/GRE protocol as your connection protocol.
By default the protocol type is “Any”.
•
Local Security Network
– These entries identify the private
network on this VPN router, the hosts of which can use the
LAN-to-LAN connection. You can choose a single IP
address, the subnet, or a selected IP range to make VPN
LAN-to-LAN connection.
•
Remote Security Network
– These entries identify the
private network on the remote peer VPN router whose hosts
can use the LAN-to-LAN connection. You can choose a
single IP address, the subnet, or a selected IP range to make
VPN connection
•
Remote Security Gateway
– You can either select remote
side domain name or remote side IP address (WAN IP
