22
trigger'.
y
Echo Time
–To determine how often an Echo request is sent to
the PPPoE server. Normally, leave this setting at its default value.
y
Echo Retry
–To determine the maximum number times that the
Echo request is allowed to be sent to the PPPoE server until a
response is received. Normally, leave this setting at its default
value.
Connection
Status
This displays the current connection status for each session.
4.3 Advanced
PPTP
This screen is only useful if using the PPTP connection method.
Figure: Advanced PPTP
Settings – Advanced PPTP
WAN Port
Used if you choose PPTP on Static/Dynamic IP as your connection
setup from primary setup. You may use PPTP manual dialup in this
page or use Port Options for auto dialup on demand or always
connected
•
PPTP MTU
–The default value is 1460 (bytes), the same as the
maximum PPTP MTU for this device
