9
There are two modes to choose in flow control, including Enable and Disable. If flow
control is set Enable, both parties can send PAUSE frame to the transmitting device(s)
if the receiving port is too busy to handle. When it is set Disable, there will be no flow
control in the port. It drops the packet if too much to handle. Default: Enable.
3.5 VLAN Configuration
This 8-port Gigabit Smart Switch provides 8 port-base VLAN groups and each VLAN groups
could comprise 1-8 port.
You can select some ports into the same VLAN group by symbol
“
＊
”
. If the packets come into
one port, which only belongs to one VLAN group, the packets just can be forwarded to other
ports of this VLAN group.
The VLAN setting:
follow these steps to assign VLAN groups.
y
Move
the
[
↑
↓
]
to
VLAN Group 1 ~ 8
column
y
Press
[ENTER]
to the desires group
y
Press
[
←
→
]
to the desires port
y
Press
[SPACE]
to select and mark
＊
to the desired port
y
Press
[ENTER]
to apply the setting
For example:
We set port-1, 3, 5, 6, 8 as VLAN1 and port-1, 3, 7 as VLAN2.
When one packet comes from port-1 or port-3, the packet could be forward to VLAN 1 and VLAN
2. It means only port-1, 3, 5, 6, 8 (VLAN1) and port-1, 3, 7 (VLAN2) will receive the packet. But
when packet comes from port-8, only port-1, 3, 5, 6, 8 (VLAN1) will receive the packet. On the
other hand, if one packet comes from port-2, only port-4 will receive this packet.
