MicroNet SP5736P, Руководство пользователя

Страница: 59 / 68

SP5736P User’s Manual
58
Iris +/ −
These are used to open and close the iris to let more or less light into the
camera. Click on <+> to open iris or <
− > to close iris.
Zoom +/ −
Users are allowed to zoom-in or zoom-out using the adjusting buttons.
Zoom-in to enlarge a certain area and zoom-out to view more area.
Direction Button
This button is used to pan and/or tilt the dome camera. Click the arrows in the
directions to be viewed.
5.3.1.3 Digital Zoom of Camera Display
Users can view the camera zoom-in images via the digital zoom function.
Zoom in/out can be easily controlled via the scroll wheel of the mouse.
Move the scroll wheel away from users to zoom in and move toward the users
to zoom out. On the upper left-hand corner will show zoom-in magnification.
The maximum magnification is X7. Also on the lower right-hand corner will
display the position of current viewing area (shown as an inner white
rectangle) comparing with the original screen (shown as an outer rectangle
frame).
In addition, the viewing area can be changed by left clicking and dragging the
mouse.
NOTE: This function will use up a lot of CPU resources. It is
recommended not to open too many programs at the same time to
avoid crash of CPU.
5.3.1.4 Manually Trigger Relay Output Devices
The remote monitoring software allows users to trigger manually one relay
output device while monitoring at the remote site. Right click on any camera
grid and select relay out A to trigger it manually. This is especially convenient
when users see situations required immediate event alert while monitoring at
the remote site.