48
5.5 Example of RFC1483 Routed mode:
Example 1:
RFC1483 Routed mode with a serial global IP
address
Section 1:
ISP provides the system parameters
ADSL Parameters
Protocol
RFC-1483 routed
Encapsulation
LLC
VPI/VCI
0/33
IP address range
211.77.10.122 to 211.77.10.126
Subnet mask
255.255.255.248
Default gateway
211.77.10.121
DNS
168.95.1.1; 168.95.192.1
Section 2:
Setup the parameters for ADSL Router
1. Setup with router via console port or telnet:
2. Reset-default
3. Setup
-System -Router
-lan
-address
-IP address: 211.77.10.121
-Subnet mask: 255.255.255.248
-address
-IP address: 192.168.16.200
-Subnet mask: 255.255.255.0
-link_type -1483 Routed
-wan
-vc
-vpi_vci: 0/33
-encapsulate: LLC
4. Save
5. After setting, restart the router.
49
Section 3:
Setup the parameters for computers (workstations)
1. Power on your computer and login if you are asked to.
2. When you reach the desktop, click the
Start
à
Setting
à
Control
panel
à
Network
and select
TCP/IP protocol
.
a. Select the IP address Tab -
Specify IP address - IP address: 211.77.10.
Subnet Mask: 255.255.255.248
b. Select the Gateway Tab -
New gateway: 211.77.10.121 -add
c. Select DNS Configuration Tab -
168.95.1.1 - add
168.95.192.1 - add
Section 4:
How to verify the status
1. Monitor status with router via console port or telnet:
Monitor - adsl (check physical layer)
- route (check routing table)
- atm (check WAN port setting)
