23
y
Rx 128-255 Bytes:
Number of 127 ~ 255-byte frames in good and bad packets received.
y
Rx 256-511 Bytes:
Number of 256 ~ 511-byte frames in good and bad packets received.
y
Rx 512-1023 Bytes:
Number of 512 ~ 1023-byte frames in good and bad packets received.
y
Rx 1024-Bytes:
Number of 1024-max_length-byte frames in good and bad packets received.
y
Tx 64 Bytes:
Number of 64-byte frames in good and bad packets transmitted.
y
Tx 65-127 Bytes:
Number of 65 ~ 126-byte frames in good and bad packets transmitted.
y
Tx 128-255 Bytes:
Number of 127 ~ 255-byte frames in good and bad packets transmitted.
y
Tx 256-511 Bytes:
Number of 256 ~ 511-byte frames in good and bad packets transmitted.
y
Tx 512-1023 Bytes:
Number of 512 ~ 1023-byte frames in good and bad packets transmitted.
y
Tx 1024-Bytes:
Number of 1024-max_length-byte frames in good and bad packets transmitted.
y
Rx CRC/Alignment:
Number of Alignment errors and CRC error packets received.
y
Rx Undersize:
Number of short frames (<64 Bytes) with valid CRC.
y
Rx Oversize:
Number of long frames(according to max_length register) with valid CRC.
y
Rx Fragments:
Number of short frames (< 64 bytes) with invalid CRC.
y
Rx Jabber:
Number of long frames(according tomax_length register) with invalid CRC.
y
Rx Drops:
Frames dropped due to the lack of receiving buffer.
y
Rx Errors:
Number of the error packet received.
y
Tx Collisions:
Number of collisions transmitting frames experienced.
y
Tx Drops:
Number of frames dropped due to excessive collision, late collision, or frame aging.
y
Tx FIFO Drops:
Number of frames dropped due to the lack of transmitting buffer.
3.5 SNMP
This function is used to configure SNMP settings, community name, trap host and public traps as well as the
throttle of SNMP. A SNMP manager must pass the authentication by identifying both community names, then it
can access the MIB information of the target device. So, both parties must have the same community name.
Once completing the setting, click <Apply> button, the setting takes effect.
Parameter description:
y
SNMP:
The term SNMP here is used for the activation or de-activation of SNMP. Default is Enable.
y
Get/Set/Trap Community:
