21
3.4.3 Port Description
Port Description is applied to change the setting of each port. In this configuration function, you can give a
name to each port. All of them are described in detail below.
Fig. 3-12
It is used to set each port’s description. This human readable description can make the port management
easier.
Parameter description:
y
Description:
This field can enter up to 47 characters for the port description purpose. Default: <Empty>.
3.4.4 Simple Counter
The function of Simple Counter collects any information and provides the counting about the traffic of the port,
no matter the packet is good or bad. As below, the window can show all ports’ counter information at the same
time. Each data field has 20-digit long. If the counting is overflow, the counter will be reset and restart counting.
The data is updated every time interval defined by the user. The valid range is 3 to 10 seconds. The Refresh
Interval is used to set the update frequency. Default update time is 3 seconds.
