PlatinumRAID Owner’s Manual
6-RAID Controls-Web Interface
The Main Menu Configuration Tree
1. Quick Volume/RAID Setup
2. RAID Set Functions
2.1 Create RAID Set
2.2 Delete RAID Set
2.3 Expand RAID Set
2.4 Activate RAID Set
2.5 Create Hot Spare
2.6 Delete Hot Spare
2.7 Rescue RAID Set
3. Volume Set Functions
3.1 Create Volume Set
3.2 Delete Volume Set
3.3 Modify Volume Set
3.4 Check Volume Set Consistency
3.5 Stop Volume Set Consistency
4. Physical Drives
4.1 Create Pass Through Disk
4.2 Modify Pass-Through Disk
4.3 Delete Pass-Through Disk
4.4 Identify Selected Drive
5. RAID System Controls
5.1 System Config
5.2 Ultra320 SCSI Target Configuration
5.3 Ethernet Configuration
5.4 Email Alert Configuration
5.5 SNMP Configuration
5.6 NTP Configuration
5.7 View Events/Mute Beeper
5.8 Generate Test Event
5.9 Clear Event Buffer
5.10 Change Password
5.11 Upgrade Firmware
5.12 Restart Controller
6. System Information
6.1 RAIDset Hierarchy
6.2 System Information
6.3 Hardware Monitor
1. Quick Volume/RAID Setup
Quick Volume And RAID Setup is the fastest way to prepare a RAID and volume set. This
option creates a RAID set with the following properties:
1. All of the physical disk drives are contained in a RAID set.
2. The RAID levels associated with hot spare, capacity, and stripe size are selected during the
configuration process.
3. A single volume set is created utilizing all 5 drives in the disk array.
4. For step by step Volume Set functions, please see Chapter 4, section 6.
