micronAir AU8500, Руководство оператора

Страница: 15 / 20

11
MICRONAIR AU8500 ULV TREE SPRAYER
6.2. Adjustment of Output from Sprayer
The flow of pesticide from the AU8500 sprayer can be adjusted by means of either
an adjustable needle valve or by interchangeable fixed restrictor orifices. The
procedure to calibrate the sprayer is as follows:
1. Put at least 20 l of the product to be sprayed into the pesticide tank.
2. Adjust the elevation of the air tube to the working position.
3. Set the
Calibration valve (3 in Fig. 2) on the side of the air outlet behind the
atomiser to CALIBRATE.
4. Make the necessary initial adjustments to the flow control (see sections below).
5. Run the engine of the tractor so that the battery is charging.
6. Place or hold a bucket or other large container under the white plastic tube (4 in
Fig. 2).connected to the Calibration valve
Fig. 2 – Flow Calibration