CCM005-1718347970-10454
micron_xccela_zedboard_qsg.pdf Rev 0.1 4/19
5
Micron
®
Xccela
™
Flash
Quick Start Guide for ZedBoard
™
Power On the ZedBoard
1
Plug in the SD card, USB cable (for the serial port), and DC adapter as shown below.
2
Switch on power by SW8.
3
If this is the first time inserting the USB port, the driver automatically downloads
and installs. After the driver installs successfully, the USB port maps to a serial
port (for example, COM11).
4
Open the serial port tool, and then configure the port number to the USB serial
port mapped in the previous step (for example, COM11).
5
Set the baud rate to
115200
.
