Digital Menu Board 5055 Wall Mount Installation Manual
Page 7
Rev. 09/18
Step 2 – Joining 2W & 3W Mounts to make a 4W or greater
Mount Type
Instructions Diagrams
For configurations
requiring 4 wide or 6
wide menu boards.
a)
Join a 2W+2W menu
board mount using the
four (4) Joiner Rail
Assemblies provided
(Part JRS). See fig.2A,
and 2B.
b)
Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C and 2D.
Fig. 2A
Fig. 2B
Fig. 2C Fig. 2D
For configurations
requiring 5 wide menu
boards.
c)
Join a 2W+3W menu
board mount using the
four (4) Joiner Rail
Assemblies provided
(Part JRS). See fig.2A,
2E.
d)
Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2E
For configurations
requiring 6 wide menu
boards.
e)
Join a 3W+3W menu
board mount using the
four (4) Joiner Rail
Assemblies provided
(Part JRS). See fig.2A,
and 2F.
f)
Tighten screws using
4mm hex wrench once
they are in place. See
fig. 2C, and 2D.
Fig. 2F
