Wiring
MyAMP has 3 line level analog inputs AN1, AN2 and AN3, one USB 24/96
digital input, and two 24/192 SPDIF coaxial and optical inputs. Beside, MyAMP is
equipped with an
aptX
®
Bluetooth module with outstanding sonic performance.
A pairing switch located on the back panel of the unit allows connecting many
different Bluetooth devices giving each one the possibility ot listening to its own
music on MyAMP.
A SUB output gives you the possibility to add an active subwoofer to your system
if needed. The RECORD ouput sends the analog signal content, just before the
volume control, to and external device such as a recorder or a processor.
MyAMP has also a trigger input to control the Standby / On status of the unit by a
5 to 12V DC trigger voltage. On the same connector you can also send, from an
external system, RC5 remote control codes to access directly all MyAMP functions.
The TRIG/IR IN connector wiring diagram as well as the list of remote control codes
is available on our web site under MyAMP/Support.
On MyAMP front panel your will find a 3.5mm headphone socket. When inserting
a headphone jack the loudspeakers are muted and the headphone volume control
setup becomes independent from the loudspeakers one.
NOTICE 140X140 12 PAGES UK.indd 3
26/06/14 16:52