31
3.4
Adjusting sensitivity
USER GUIDE
Fig. 1
Fig. 2
Adjusting sensitivity enables you to compensate for a signal
level difference between your sources (+ or - 6 dB).
This adjustment is particular to each input. You should be
connected to the source you wish to adjust before starting (in
this example we are adjusting the LINE terminal).
From the main display (fig. 1), press on the button at the
bottom left.
Scroll through the list until ‘SENS’ (fig. 2) appears and
confirm with ‘OK’
A sensitivity screen appears where you can make adjust-
ments. You can confirm any adjustments by selecting ‘OK’ or
cancel them using ‘<’.
SENS
<
OK
symbolise there is an active sensitivity setting
(here, sensitivity is lowered)
LINE
20
LINE