29
3.2
Choosing your source
USER GUIDE
USB
AES
<
OK
The main display (fig. 1) shows which input is active
(USB), the volume (20) and any specifications of the
input signal (only for digital signals).
To change the input source, press on the button at the
bottom left.
A list of sources will now appear in place of the
volume (fig. 2).
By using the up and down arrows you can select the
desired source and confirm using the « OK » button.
If you change your mind and don’t want to change the
source, press the top left button ( « < » ) to return to the
main display.
Fig. 1
Fig. 2
Point the infrared remote control at the device and use it to select your music source.
You can use the buttons at the top of the amplifier to do this if you prefer.
USB
20
192 kHz