Technical Guide to safety, use and maintenance of the system
The overcoming of differences in height (e.g. thresholds, steps, obstacles, fairleads) must be carried
out by lifting the trolley completely and relocating it gently after the obstacle. This operation may
require the presence of two operators. The CAR POLE trolley can be gripped along the vertical rod.
CAR TORO carriages can be lifted by gripping the side handles on both sides, making sure that the
carriage does not leverage forward or backward.
Repercussions during movement can damage the cart or the system itself.
After moving the system,
-
Place the system and the possible amplifier/stimulator stand in the desired location, making
sure that the position of the trolley and / or the stands does not create obstacles to
movement near the system and that an adequate power outlet is available at a distance
compatible with the length of the power cord.
-
Lock the brakes
-
Restore the desired height setting of the PC / monitor / camera holder and lock it in place
-
Restore the desired position of the arms and fix it with the appropriate blocks.
-
If necessary, reconnect the connecting cable between the applied parts (amplifiers)
supported by the stand and the rest of the acquisition system.
-
Restore the position of drawers and extractable shelves (e.g. keyboard tray, mouse
holder).
-
Connect the power cord to the socket
The system can now be switched on again
Rev.
1.04
pag. 16 di 24
The cable may create a tripping hazard when it is left free on the floor. It is recommended to run
the cable in areas not accessible by users and patients.
