Technical Guide to safety, use and maintenance of the system
The cart is designed to support the weight of the system. It must not be subjected to stresses
deriving from additional loads.
The trolley makes the system easily movable but not transportable. The trolley is not intended for
movements frequent, on long distances or which require passing steps or unevenness. If the use
environment includes these conditions, it is necessary to pay particular attention to the instructions
for the movement and to periodically monitor the conditions of the trolley.
The housing of the individual parts of the system on the trolley or table must remain unchanged.
During the transport of the system, special care must be taken to ensure that no movement or fall
of the devices occurs.
Before moving the system:
•
Turn off the system.
•
Disconnect the power supply cable and put the free end on the trolley shelf or fasten it to
one of the supports so that it cannot interfere with the movement of the wheels.
•
If parts of the system are placed on other supports (e.g. stands for the amplifier or flash
stimulator), disconnect the power and communication cable from the side of the device (leave it
connected to the system) and put the free end on the shelf of the trolley or fasten it to one of the
supports so that it cannot interfere with the movement of the wheels
•
Lower the adjustable supports of the PC / monitor / camera to the lower end position. Lock
the position of the supports again.
•
Close the amplifier supporting arms on the trolley and, if necessary, fix the position with the
appropriate blocks.
•
Close all drawers and pull-out shelves.
•
Release the brakes of all the wheels
The movement of the system must be carried out exclusively by pushing or pulling the handles
intended for the purpose. Pulling or pushing the system by grasping it in other places (for example
the keyboard tray, the monitor or the PC) can lead to the damage of the support systems, not
designed to carry the weight of the entire system.
The handle is designed for the horizontal movement of the trolley (pushing or dragging) and only
horizontal forces must be applied to it.
Rev.
1.04
pag. 15 di 24
Do not lean on the keyboard tray when using the keyboard
Do not climb or place your feet on the shelves or on the wheels of the trolley
Do not lean heavily on the handle or push it down.
Do not subject the cart to kickback e.g. going down steps or overcoming obstacles
DISPLACEMENT OF
THE SYSTEM
