Micromax X225, Руководство пользователя

Страница: 8 / 26

7
charging indicator icon is displayed on the screen of the phone. If you do not recharge the battery more than two days, the battery may enter the
overdischarge protection state. Thus, in order to get the battery into normal charging mode quickly, we recommend that you charge the battery on
an adapter to activate the battery for charging, and then charge the battery with the phone. Alternatively, you can charge the battery with the
adapter.
z
Do not change the parts and accessories of the battery by yourself or take off the battery cover for safety.
z
Use only original batteries and charging devices. Otherwise you risk serious damage to health and property.
z
The temperature range for charging a battery is -10°C to +55°C. Do not charge batteries in too high or too low temperature.
z
Do not use the phone while charging.
z
It takes approximately four hours to fully charge a battery. Remove the charger quickly after the battery is fully charged.
T-Flash card
T-Flash card is a kind of multimedia memory card. You can connect the phone to a computer with a USB cable to copy and move files between the
T-Flash card and the computer. You can also browse photo, audio and video files stored in the phone or T-Flash card by the computer. Plug the smaller
end of the USB cable into the data cable jack of the phone, and the bigger end into the USB port of the computer.
Switching the phone on
Press and hold the End key to turn the phone on/off. The phone will automatically search for the network, if there is no password protection for the
SIM card and the phone. After the phone is registered on the network, the name of the service provider will be displayed on the idle screen. Then you
can make or answer a call.
The phone remains in searching state if it fails to find the available network, temporarily.
After the phone is switched on, if a password is required, enter the correct PIN code and press the left soft key or the OK key for confirmation. After
unlocked, the phone will display the name of the registered network and the signal strength. Contact your network operator if you do not know the PIN
code. The default password of the phone is “1234”.
After the phone is switched on, if it displays “Insert SIM Card” on the screen, press and hold the end key to turn the phone off, and check whether the
SIM card is properly inserted.
Switching the phone off
Press and hold the end key to turn the phone off. After the switch-off animation is displayed on the screen, the phone will be switched off.
Do not attempt to turn the phone off by directly taking out the battery.