525 Berne St
Berne, IN 46711
1-260-589-2136 x3211
Page
3
of
10
26-18-1006 rev.-
Model: LONG ARM
SAFETY
CAUTION
:
➢
Do not operate waste truck packing blade while the tipper is in the dump or raised position.
The packing blade may damage the waste cart tipper.
➢
Do not cover the brake/safety/indicator lights on the vehicle with the mounting plate, the
tipper unit itself, or any other related hardware.
➢
Safe working procedures must be followed at all times. Always wear correct safety gear.
➢
Follow OSHA Lockout/Tagout procedures during all installation, repair, or maintenance.
➢
Inspect operation of waste cart tipper daily before starting route.
➢
Ensure all persons are clear of waste cart tipper before and during operation.
➢
Never operate a damaged waste cart tipper.
➢
Never reach into a waste container or place hands or arms in harm’s way during operation.
➢
Never lift damaged carts with missing or broken parts.
➢
Never lift an overloaded cart.
➢
Never use waste cart tipper to lift items other than properly designated carts.
➢
Never loosen any hydraulic fittings or hoses unless the system is off and depressurized.
➢
Never weld on truck unless a ground is in place, the battery is disconnected, and no
flammable objects are present.
➢
Do not remove the stop fasteners. They serve a functional purpose to limit the rotation of
the actuator and extend service life.
INSTALLATION PREPARATION
1.) Please read this manual completely and familiarize yourself with all of the necessary
procedures. Contact Micromatic LLC at (260) 589-2136, ext. 3211, if there is a question.
2.) To install the waste cart tipper onto the truck to the installation dimensions stated in this
service manual requires an empty truck parked on a smooth and level surface.
3.) Waste cart tippers can weigh over 300 pounds. During installation, always use a hoist to
lift and secure the lifters into place and to prevent accidents.
4.) During installation, secure the waste cart tipper with a chain or suitable lifting strap to
prevent accidents.
5.) Reference 26-18-1001 for the waste tipper hydraulic tap-in kit user manual.
TWO YEAR LIMITED WARRANTY
➢
Seller warrants that Buyer will receive good title to the products and that the
products received by initial purchaser will be free from defects in materials and
workmanship consistent with trade practice quality control for a period of two (2)
years from date of shipment, provided:
o
The product has been installed and used within defined specifications.
o
No repair or alteration has occurred other than by Seller’s personnel.
o
No misapplication or negligent use has transpired in the judgement of
Seller’s personnel.
