525 Berne St
Berne, IN 46711
1-260-589-2136 x3211
Page
8
of
10
26-18-1006 rev.-
Model: LONG ARM
TIPPER MOUNTING OPTIONS
The standard tipper base mounting plate is equipped with one mounting pattern:
MAINTENANCE
Lubrication
➢
Pivot joints are equipped with six (6) easy access grease zerk fittings.
➢
Main pivot joints should be greased monthly to flush contaminates from pivot joint.
Inspection Prior to Each Use
➢
Fasteners should be inspected to ensure all are in place and tight
– See Torques below.
➢
Stop bolts serve a functional purpose to limit the rotation of the actuator. Make sure they
are in place and do NOT remove them.
➢
Inspect all welds for cracks and repair or replace as necessary.
➢
Hydraulic oil and oil filter on the waste truck should be checked periodically and changed
according to the manufacturer-recommended intervals.
