MicroLux 86908, Руководство пользователя

Страница: 6 / 11

ASSEMBLY
Bolt
Small
Washer
Big
Washer
Lock nut
Work table
locking nut
Wrench
Work table
Blade install Slot
Table support
SAW TABLE ASSEMBLY
Using the four bolts provided,
attach the table to the
trunnion, tightening the bolts
after all four have been fitted.
Once attached, position the
2-sided table insert into the
square recess. The side of
the insert with beveled edges
should face upward when
performing 45˚ angled cuts.
The level stop screw is adjustable. Using
a square, level the table to the blade as
shown. Once level is achieved, tilghten the
lower nut against the saw housing.
Table insert
Saw table
Saw table
locking
screws
Saw table support Saw table support
Lower nut
Table
set square
level stop
screw
Angle scale
Lock knob
Table position
adjusting bolts
Angle adjustment knob