MicroLux 86908 Скачать руководство пользователя страница 1

#86908 

7-3/4" Band Saw

User's Manual

WARNING: To reduce the risk 

of injury, the user must read and 

understand the user's manual 

before using this product.

MM041117

LIMITED WARRANTY

Micro-Mark guarantees this product to be free of manufacturing 

defects for a period of 90 days from date of shipment, regardless 

of the amount of time the product has been used and/or stored. 

The product, or parts thereof, will be repaired or replaced (at our 

option) and shipped back to you free of charge if the following 

conditions have been met:
• the product is shipped back to us within the warranty period,
• incoming transportation charges have been pre-paid,
• proof of purchase has been provided, and
• our Service Department determines that the problem was 

caused by a defect in material and/or workmanship.
Please return to Micro-Mark Product Service Dept. at the address 

below with a note explaining the problem.
For products returned after the warranty period, our regular repair 

charges shall apply. Please include your telephone number so 

we may advise you of the repair estimate. Any product returned 

to the purchaser without repair work being performed shall be 

shipped C.O.D. for the return transportation charges.
This warranty does not cover damages resulting from improper 

assembly, adjustment or maintenance, accident, alterations, 

normal wear, abuse or misuse, and does not apply where 

products are used commercially. The warranty shall also not 

apply when the product has been used for purposes beyond 

those for which it was designed or unreasonable for its size.
Micro-Mark makes no other warranty of any kind whatever, 

expressed or implied, and all implied warranties of merchantability 

and fitness for a particular purpose which exceed the above 

mentioned obligation are hereby disclaimed by Micro-Mark and 

excluded from this warranty.
This warranty gives you specific legal rights and you may also 

have other rights which vary from state to state. The obligation 

of the warrantor is solely to repair or replace the products. 

The warrantor is not liable for any incidental or consequential 

damages due to such defect. Some states do not allow the 

exclusion or limitations of incidental or consequential damages, 

so the above limitations or exclusion may not apply to you.
If you have any questions, please contact our Product Service 

Department by email: [email protected]

Product Service Department 

340 Snyder Avenue 

Berkeley Heights, NJ 07922

Содержание 86908












Отзывы: