Microlife FR1MF1, Инструкция по эксплуатации

Страница: 11 / 18

7
will indicate whether the beeper is activated by displaying a
beeper icon on the screen.
If no button is pressed for 5 seconds, the device automatically
switches into the ready for measurement mode.
6. Changing between Body and Object Mode
For changing from body to object mode, slide the mode Switch
6
at the side of the thermometer upwards.For switching back to
body mode, slide the switch down again.
7. Directions for Use
Measuring in Body Mode
1. Press the ON/OFF button
5
. The display
3
is activated to
show all segments for 1 second.
2. When the «°
C » or «° F » icon is flashing, a beep sound is heard
and the thermometer is ready for measuring
AK
.
3. Aim the thermometer at the center of the forehead with a
distance of no more than 5 cm. Please remove any hair,
sweat or dirt from your forehead before measuring to improve
the accuracy of the readings.
4. Press the START button
4
and steadily move the ther-
mometer from the middle of the forehead to the temple area
(about 1 cm above the eyebrow). The activated blue tracking
light will indicate the area being measured. After 3 seconds
a long beep will verify the completion of measurement. If the
temple
area hasn’t been reached before the long beep is heard,
repeat he measurement as described above, but move the
thermometer a little faster.
5. Read the recorded temperature from the LCD display.
Measuring in Object Mode
1. Follow steps 1-2 above, then aim the thermometer at the center
of the object you want to measure with a distance of no more
than 5 cm. Press the START button
4
After 3 seconds a long